FLSmidth Inc. (F.L. Smidth, Inc.) - Item # 305, Airslide Aeration Unit Packages
Sitemap
Search Catalog :
By Part Number
By Keyword
Home
Pneumatic Conveying
Pneumatic Blending
Upgrades, Accessories, and Maintenance
Air Compressors
Gas Compressors
Air Gravity Conveyors and Airslide™ Systems
Feeders, Airlocks & Rotary Valves
Diverter Valves
Fuller-Kinyon™ Pumps (Material Handling Pump, FK Pump, Screw Pump)
Railcar/Truck Unloading
Ship & Barge Unloading Systems
Storage Reclaim Equipment
Contact Us/RFQ
FLSmidth Pneumatic Transport Corporate Site
Search Catalog
By Keyword
By Item #
All Categories
Airslide Aeration Unit Packages
All Categories
>
Pneumatic Conveying
>
Standard Pneumatic Conveying Equipment
>
Bins / Silos
>
Airslide Aeration Unit Packages
>
Item # 305
Download PDF
Printable Page
Email This Page
Save To Favorites
Item # 305, Airslide Aeration Unit Packages
Download PDF
Email This Page
Save To Favorites
Airslide™ Aeration Unit Packages
<...
larger image
larger image
Specifications
·
Application
·
Order Data
·
Note
Specifications
Description
A. Description: Airslide Aeration Unit Packages - 3 spoke arrangement
Hopper Slope Length
6 - 10 ft.
Airslide Aeration Unit
three - 5 foot units
Min. Air Requirement
100 scfm
Application
FLSmidth Airslide Aeration Unit Packages are supplied for installation as aeration units on the sloped conical bottoms of bins and silos to aid in the withdrawal of dry, relatively free flowing material. Slope angles should be no less than 45° from the horizontal with silo diameters up to 21 feet (6.4 m). Units can be applied to other storage configurations.
Order Data
Specify - Airslide Aeration Unit Package Number
When ordering specific packages it is important to determine the slope length of the silo hopper within the limitations mentioned in paragraph I. Airslide aeration units should be sized to run no less than one half of the slope length.
Materials which have relatively free-flowing properties usually require a three spoke array; whereas a six spoke array should be used with fluidizable materials which require maximum aeration.
Packages 315 and 615 are offered when more complete clean-out in the spring line area of larger silos is required.
Note
Inside of cone should be smooth and flat. If not, fillers must be employed to afford continuous support throughout length of Airslide conveyor section.
Locknuts must be pulled tight against cone plate to insure that the section rests against inside face of cone for its entire length.
Avoid any burning or welding near exposed Airslide fabric. If burning or welding is necessary, protect the exposed fabric from sparks or hot metal.
Each Airslide conveyor section is furnished with two tank nipples & caps. One cap must be removed for air connection.
MORE IMAGES
·
Piping Schematic
DOWNLOADS
Brochure
(PDF, 84KB)
